Parts List
(1990 454SS supercharger/heads/carb installation.)
Induction:
|
Weiand 177 Prostreet Supercharger, Summit # WND-6521-1 |
$1,709.00 |
|
Weiand 7" Performance crank pulley for 177 supercharger. (6" pulley was supplied) |
131.00 |
|
Boost Guage, Blackface, 2-5/8", ATM-2310, Mechanical Boost 30"Hg-Vac/20psi, (Includes 6’ tubing and fittings) |
27.95 |
|
Tachometer: ATM-2891 2-5/8" mini tach, 0-6000rpm |
81.39 |
|
Holley 870 CFM Street Avenger Carb Summit # HLY-0-80870 |
420.00 |
|
Carb gasket, Square bore 1/16" thick, Summit # MRG-54 |
1.95 |
|
Throttle linkage spring kit, SECO, Moroso # MOR-64923, or Summit # SUM-G1327 |
16.00 |
|
Russell throttle attachment pivot (SECO) |
8.00 |
|
Holley Dual Feed Fuel line: #HLY-34-29 |
65.00 |
|
Edelbrock Aluminum Heads, Summit # EDL-6047 |
1,677.95 |
|
Edelbrock head bolt kit, Summit # EDL-8551 |
102.95 |
|
Felpro head gaskets (4.540 gasket bore, 0.041 thickness), Summit # FPP-1017-1, (with the Pre-flattened steel wire ring) |
2 @ 33.95ea |
|
Low profile Air Cleaner with drop/recessed bottom, Edelbrock Signature Series 14" with recessed base (SECO) Edel #1207 |
29.00 |
|
Mr. Gasket. #5827 Ultra-seal Intake gasket (from CBI) |
18.00 |
|
Valve Covers: Edelbrock Signature Series, #4680 |
42.00 |
Electrical:
|
MSD Blaster SS coil, Summit # MSD-8207 |
34.95 |
|
MSD Boost Timing Master, 6BTM, Summit # MSD-6462 |
319.95 |
|
MSD Street Pro Billet Distributor, Summit # MSD-8361 Note: had to pick up a different distributor Cap so it would work with the stock type ignition wiring. Picked the cap up from SECO Performance in Huntsville |
182.95 30.00 |
|
Boost Guage, Autogage, Autometer # 2310, 0-20 psi boost, 0-30 vacuum. |
$45 45.00 |
|
Tachometer, Autometer # 2891, 0-6000 RPM. |
80.00 |
Engine Internal:
|
Comp Cams 3/8" standard length Magnum pushrods (req by heads), Summit # CCA-7154-16 |
94.95 |
Fuel:
|
Holley Electric Fuel Pump,110 GPH, Summit Part #: HLY-12-802-1, with regulator. (Blue 3/8 NPT) Flow rate 70 gph @ 9 psi. 110 gph free flow. -Did not use the included dead-head type Regulator HLY-12-803. This reg adjusts from 4-1/2 – 9 psi. |
91.95 |
|
Barry Grant Bypass Regulator #171021 (SECO Performance) |
60.00 |
|
3/8" pipe fittings welded directly into the rear of the tank. (MEWS electrical supply) |
1.50 |
|
Russell, Stainless Steel Braided -6AN fuel line 20' |
100.00 |
|
Russell & Aeroquip -6AN fittings -- various (estimated cost) |
150.00 |
Hood:
|
Harwood 4" Cowl Induction hood #B-47204 (SECO/Price includes tax & shipping) |
$520.00 |
Exhaust:
|
Edelbrock RPM cat-back exhaust system #5601 |
260.00 |
|
Summit 3" cutout. |
27.00 |
|
Exhaust manifold / Header gasket, Felpro #1411. |
15.00 |
Cooling:
|
Water Neck, 45 degree, O-ring style, Summit # SUM-G3801 |
12.00 |
|
Flex radiator hose, 30" X 1-1/2" from Advanced Auto |
10.00 |
|
Radiator Hose Adaptor, Gates #???? 1-1/2" - 1-1/4" |
3.00 |
Traction Bars:
|
Caltracs #3310 Email From Caltracs ( CALTRACS@aol.com):The part # for your truck is 3310 which also fit the C-2500 trucks for the larger 3-1/4" od axle housing. If you have further questions or would like to order please call us at 1-800-607-2266 Thanks Calvert Racing
|
320.00 |
Rollpan:
|
Rollpan, Harwood #47560 (Summit # HRD-47560) -- OR -- Rollpan, Summit# SUM-G201110 |
140.00
96.99 |
Driveshaft loop:
|
Lakewood LAK-18000 (Price excludes the purchase of 1x2x48" rectangular tubing.) |
26.95 |
Exhaust tips:
|
2-1/2" in 3-1/2" outlet, stainless steel, slant cut, 12" long, clamp on, SUM-690053 -- OR -- 2-1/2" in 3-1/2" outlet, stainless steel, slant cut, 18" long, clamp on, SUM-690056 |
22.95 ea. 29.95 ea. |