The Gurley Loop is a 35 mile clockwise route on mostly flat to rolling terrain with a few short steep hills.

Note: the rest stop at mile 18 (the Little Store) is currently closed.

Directions to start, at the Cove Park ballfields near Hampton Cove:

If traveling over Monte Sano on Highway 431 (east on Governors Drive): go 4.8 miles after passing Monte Sano Boulevard and turn Left at Old 431/Sutton Road. Travel 1.6 miles and turn right onto Old 431. The ballfields are on the right.

If traveling over Cecil Ashburn Drive: continue straight on Sutton Road for 0.7 miles and go straight across Highway 431. From the intersection go 1.6 miles and turn right onto Old 431. The ballfields are on the right.

 Turn Leg  Description Mile
0.1  from Cove Park ballfields x
1.0  on Eastern Bypass x
0.9  on Highway 431 Access onto
 Audubon Lane		 x
0.1  on Whistler Lane x
0.1  on Deford Mill Road x
0.1  on Cranfield Road x
0.4  on Featherstone Lane x
2.3  on Caldwell Lane at "T" onto
 King Drake Road		 x
4.0  on Dug Hill Road at "T" x
0.4  on Wall Road x
1.3  across US-72 to stay on Wall Road x
0.3  on Brownsboro Road at "T" x
0.7  on Stone Drive x
0.5  to stay on Stone Drive x
1.2  to stay on Stone Drive x
0.7  on Hays Road x
2.7  on Salty Bottom Road x
1.2  on Gurley Pike at "T" x
   
 Turn Leg  Description Mile
1.5  on Acuff Road
 (Little Store is closed)		 x
0.8  on Killingsworth Cove Road x
0.8  on Harrison Cove Road x
1.1  on Tom Rutland Road x
1.3  on Gurley Pike at "T" x
2.0  on Hereford Road x
1.1  on Section Line Road x
0.1  across RR Tracks to stay on
 Section Line Road		 x
0.1  on 4th Street crossing US-72 x
Rest Stop -  at BP Station on right
 finish in 8 miles		 x
0.1  continue South on 4th Street x
0.4  on Childress Street at "T" x
1.7  on Miller Road at "T" x
2.7  on McMullen Road at "T" x
1.6  on Esslinger Road x
0.4  on Cherry Tree Road at "T" x
1.2  on Old Highway 431 at "T" x
-  at Cove Park ballfields x

Note: Enable "Print Background Colors" in your browser's print dialog to print this cue sheet in color.
To print in shades of gray enable the same setting but use "Black" ink.
Warning: JavaScript must be enabled in your browser's settings for cumulative mileage.
This is why the "Mile" column only shows x's and the "Print Cue Sheet" button doesn't work.