Return to MDS Pottery Page

Three Wheel Turned Candle Holders

These 3 pieces were all turned with white clay and fired at low temperatures (cone 06). After bisque firing, various commercial decorative glazes were added. One was a matte green finish (left) and the (right) one was a semi-gloss glaze with a few crystals added. The center piece was a rich crystal glaze that provided great contrasts as the dark black and blue crystals ran on the blue-green base color. All of them will hold the little votive candles if desired. All of them measure about two inches in diameter and range from two to three inches high. They were fired to cone 06.



Return to MDS Pottery Page

Please send any comments to M.D. Smith (mdsmith@HiWAAY.net)


This page created by M.D. Smith and last modified on February 12, 1996 ©