not my drawing or web page


[ Follow Ups ] [ Post Followup ] [ North Alabama Fishing Forum ] [ FAQ ]

Posted by jd on April 16, 2003 at 17:53:00:

In Reply to: Re: Build a Rod Rack / Guntersville Dam? posted by jcass on April 15, 2003 at 21:42:40:

I merely provided a link to that page that I had previously found. I have been involved with engineering CAD for 14 years and don't have a clue what program was used. It appears to be a modeling type program due to the shadow effects in the 3-D views. All I can tell you is that the drawing does not appear to be to scale which makes me think it was a not-so-scientific or CAD based product. When I installed my bottom angled pieces, the supports overlapped so I had to trim the corners. Also, the bottom rod handle supports should be a total of half the width of the total unit. The unit will appear much wider, as compared to the height, if you build it with the provided dimensions.

Perhaps the web page has a link to the web page owner.

Good luck!


Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ North Alabama Fishing Forum ] [ FAQ ]