Posted by Danny Blackburn on July 01, 2002 at 07:03:18:
In Reply to: loose rivets posted by Dub WHITWORTH on June 30, 2002 at 14:01:38:
If it is a flat bottom. It is easy to tighten up the rivets but you need some help. One person to hold a large hammer or piece of steel against the head of the rivet. Then you use another hammer to hit the rivet. I have done this several times. If you can find a person in your area that welds aluminum you can have them welded. I charge 50 cents per rivet to weld them up, if they are clean.
Post a Followup