Posted by Alex on June 20, 2005 at 14:19:50:
In Reply to: Live Well Cleaners? posted by CarlB on June 20, 2005 at 14:01:11:
CarlB, Go to any local store and get some of those BLUE scotch brite scrubing pads. The blue one's do not scratch surfaces. Once boat is in the water, allow a small amount of water into livewell, approximately 1/4 gallon. Pour about a half box of baking soda into the livewell. Scrub the bottom and sides until clean. Once you have scrubed all the nasty stuff off, go ahead and fill the livewell all the way up. Ride around several minutes. Pull plug and you should have a much cleaner livewell.
If the above does not work, you can follow up with some oxy-clean using the same technique as described above. If the baking soda does not work, the Oxy-clean will. Good luck and I hope you can get your livewell clean!
Post a Followup