Posted by minnow bucket on March 07, 2004 at 18:49:18:
In Reply to: Trolling motor mounted depth finder posted by Kent on March 07, 2004 at 18:14:57:
if the bar is interfering with the signal that comes out of the smooth bottom part of the transducer, then it will affect it. It may be possible to somehow mount the transducer with the bar on there but it would probably need to be mounted with a side mount. If this is a foot controlled motor don't forget to take in account the turning of the trolling motor shaft. Leave some slack in the cable to allow it to turn without messing the cable up.
Post a Followup