Posted by Alex on December 08, 2003 at 07:10:39:
In Reply to: Re: Need a favor! posted by Larry on December 05, 2003 at 19:03:12:
Larry pallet "crappie" beds are easy to construct. What you do is get a pallet and remove all boards off the side that has the most. Once this has been done, take the boards and attach vertically to the members that are still holding the pallet together. You want to stagger the boards. What you end up with is a crappie pallet bed. Once the pallet is complete, place 4 cinder blocks, one on each coner of the pallet. Place the cinder block over the coner verticle boards. You might have to add more weight to sink depending on what the pallet is made out of. These things take a little work but well worth the effort! Good luck!
Post a Followup