If you find this page useful, please
of $1, $5, $25 or more through your PayPal account. It's fast, it's easy, and best of all it will keep this page alive.

Create a Code 39 Bar Code

Fill-in the bar code data and, optionally,
select the individual bar code parameters.
Note: Carriage returns (CR) and line feeds (LF) are NOT supported in Code 39. Code 39 supports A-Z (caps only), 0-9, and -. $/+% only. See the full table here.
Data to Encode:    * *

     Home
Symbol Polarity: Black symbol on white background or visa versa. Black-on-white is the 'normal' configuration. White-on-black can be thought of as a negative image.
Resolution: Dots per inch of printing device. Bar code printers are typically 300 dpi. The program assumes that a minimum of one complete dot is needed to construct a bar and dots cannot overlap. Certain densities may not be possible, so the closest possible density will be used.

Quiet Zone: Number of bar widths (density) to use for the quiet zone. A minimum value of 10 is recommended.
Density: The width of an individual bar (5 = .005"). Different bar widths within the same bar code are multiples of the density. The density value is used in calculating the relative size of the Quiet Zone.
Use check character: Check this box if you would like to include a check character. The default is NOT to use a check character.
JPEG File type: Check this box if you would like a JPEG image. The default file type is PNG.
Include Text: Check this box if you would like the text printed below the bar code, provided there is enough room. The default is to print the text.

Questions? Comments?



If you find this page useful, please
of $1, $5, $25 or more through your PayPal account. It's fast, it's easy, and best of all it will keep this page alive.



Last modified: 17:02:40 on 03/09/09