If you find this page useful, please
of $1, $5, $25 or more through your PayPal account. It's fast, it's easy, and best of all it will keep this page alive.

Create a Code 128 (B or C) Bar Code

Fill-in the bar code data and, optionally,
select the individual bar code parameters.
Note: Carriage returns (CR) and line feeds (LF) are NOT supported in Code 128 B & C. This table lists the supported characters.
Data to Encode:   
     Home
Symbol Polarity: Black symbol on white background or visa versa. Black-on-white is the 'normal' configuration. White-on-black can be thought of as a negative image.
Resolution: Dots per inch of printing device. Bar code printers are typically 300 dpi. The program assumes that a minimum of one complete dot is needed to construct a bar and dots cannot overlap. Certain densities may not be possible, so the closest possible density will be used.

Quiet Zone: Number of bar widths (density) to use for the quiet zone. A minimum value of 10 is recommended.
Density: The width of an individual bar (5 = .005"). Different bar widths within the same bar code are multiples of the density. The density value is used in calculating the relative size of the Quiet Zone.
JPEG File type: Check this box if you would like a JPEG image. The default file type is PNG.
Include Text: Check this box if you would like the text printed below the bar code, provided there is enough room. The default is to print the text.

A short explanation: This script was written in just a couple of hours. Therefore, it is very rudimentary and doesn't do Perl justice. It will create either Code 128 "B" or "C" only. Code 128 "A" is not supported at this time. Code 128 "C" will be used if the data string is numeric characters only AND there are an even number of characters (like, "123456"). Otherwise, Code 128 "B" will be used, if possible. The encoding scheme (B or C) will be at the top of the results page. For more information on bar code specifications, please see BarCode1.

You can download an adaptation of this script as a Perl module (Barcode.pm), which also includes a CueCat decoder, by Scott Barninger (barninger at fairfieldcomputers dot com).

If you find this page useful, PLEASE
of $1, $5, $25 or more through your PayPal account. It's fast, it's easy, and best of all it will keep this page alive.

Create a Code 39

Questions? Comments?

Last modified: 17:02:40 on 03/09/09